How do I reset my quantum wheelchair?

When you locate the reset button, use a pin or other thin object to press and hold the button for a few seconds . Wait for the Response – Once you've held the button for a few seconds, release it.

Why is my electric wheelchair not working?

Make sure that they are charged and that they are properly connected. If the batteries are low, they may not be able to provide enough power to operate the wheelchair . If the batteries are not the problem, the next step is to check the motor. Check for any loose wires or other damage.

Can dead wheelchair batteries be recharged?

If you're dealing with a dead battery, you may be able to stretch out its life a little longer by recharging it and draining it fully around five times to remove the sulfations . However, expect it to take longer to recharge, and make sure you buy new batteries straight away!

How to reset an electric wheelchair?

Steps to Reset a Power Wheelchair: Unplug the charger. Now, you need to unplug the charger. ... Plug in the charger. Now, plug in the charger to the wheelchair and wait for about 15 to 20 minutes. ... How to Reset a Power Wheelchair. ... Disconnect the battery. ... Wait for 30 to 40 minutes. ... Start the wheelchair. Sep 7, 2022

What is the code for electric wheelchair?

Information HCPCS Code Description K0813 POWER WHEELCHAIR, GROUP 1 STANDARD, PORTABLE, SLING/SOLID SEAT AND BACK, PATIENT WEIGHT CAPACITY UP TO AND INCLUDING 300 POUNDS K0814 POWER WHEELCHAIR, GROUP 1 STANDARD, PORTABLE, CAPTAINS CHAIR, PATIENT WEIGHT CAPACITY UP TO AND INCLUDING 300 POUNDS 76 more rows

What is the lifespan of an electric wheelchair?

The lifespan of Power Wheelchair Typically the lifespan of a wheelchair ranges from 3 to 10 years . A top-quality wheelchair with premium material in its frame and other parts can last for almost 10 years.

What type of battery is in a quantum wheelchair?

Your Quantum® power wheelchair uses two long-lasting, 12-volt, deep-cycle batteries . These wheelchair batteries are sealed and maintenance free. Because they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle power wheelchair batteries are designed to handle a longer and deeper discharge.

How do you reactivate a dead lithium battery?

If your lithium-ion battery dies, here are the actions you need to take to jumpstart it: Step 1 get the charger ready. ... Step 2, plug in the charger. ... Step 3, Verify Voltage. ... Step 4, Alligator clips should be attached in. ... Step 5, Keep an Eye on the Charger. ... Step 6, Disconnect the power source. ... Step 7, Check the Battery. Sep 15, 2023

Is there a reset button on a mobility scooter?

The reset button on a mobility scooter is typically located on the control panel or near the battery pack . It may be labeled as “reset” or have a unique symbol. Refer to your scooter's user manual for the exact location and instructions on how to use it.

Where is the circuit breaker on the quantum q6 edge?

Controller Power Module: This enables the controller to communicate with the batteries and the motors. Main Circuit Breaker (located on the rear main frame ): The main circuit breaker is a safety feature built into your power chair.

Quantum Electric Wheelchair Manual (2024)

1. Quantum Owners Manuals | Quantum Rehab® :: Power Wheelchairs

Learn about Quantum Rehab® Owners Manuals as they pertain to our electric wheelchairs and other power wheelchair accessories.
Learn about Quantum Rehab® Owners Manuals as they pertain to our electric wheelchairs and other power wheelchair accessories. Contact us today with questions!

HCPCS Code	Description
K0813	POWER WHEELCHAIR, GROUP 1 STANDARD, PORTABLE, SLING/SOLID SEAT AND BACK, PATIENT WEIGHT CAPACITY UP TO AND INCLUDING 300 POUNDS
K0814	POWER WHEELCHAIR, GROUP 1 STANDARD, PORTABLE, CAPTAINS CHAIR, PATIENT WEIGHT CAPACITY UP TO AND INCLUDING 300 POUNDS

Quantum Electric Wheelchair Manual (2024)

FAQs